Another sound test!

After the first successful sound test with the correct equipment I decided to test multiple radio mics to see if I could achieve the same results but just doubled. Although this time I did not have access to the DPA's and Puretone earpieces, I was able to book out the Sennheiser Radio mics and Sound Devices 633.

Overall it was a success. Below is a video of the results. One with, and one without music.

Puretone IR3

Battery type: 10A

Colours: Biege
Frequency Range: 200-5600Hz
Battery Drain: 0.7 mA
Typical Battery Life: 200 Hours
Weight: 1.5g approx. (including battery)
Operating Temperature Range:-10C to 40C.

DPA 4071

Transducer         Pre-polarized condenser element with vertical diaphragm

Polar Pattern     Omnidirectional

Frequency Response      100Hz - 15kHz with 5dB soft boost at 4-6 kHz ± 2dB

Dynamic Range (Typical)              97dB (typical)

Signal-to-Noise Ratio     re. 1 kHz at 1 Pa (94 dB SPL): 68dB A-weighted (typical)

Maximum Input Sound Level     144dB

Power Requirements    Min 5V - max 50V through DPA adapter

Output Impedance         30-40 Ohm

Output Connectors         MicroDot - XLR out from DAD6024 power supply (included)

Dimensions        .67 x .21" (17 x 5.4mm) (Length x Diameter) Cable: 5.9' (1.8 m) (Length)

Weight 0.32 oz (9g) (incl. cable and MicroDot connector)